Johnsen's R134A Quick Charge Kit - Imported From Usa
Johnsen's R-134A Quick Charge Kit Plastic
- Designed for easy recharging of R-134a A/C systems using 12oz. cans.
- Contains a dispending valve. Hose and low side quick coupler.
- Plastic
Direction for use :
- Turn the valve handle of the charging kit counterclockwise until the piercing stem is in the up position.
- This will prevent piercing the R-134a can.
- Screw the low side service port on the A/C system.
- Locate the low side service port on the A/C system.
- Remove the cap from the low side service port.
- Attach quick connect fitting to the service port by pulling the connector ring back as you push it onto the service port.
- Make sure the fitting is tight.
- Start the engine and set A/C system control to max A/C.
- Turn the valve handles counterclockwise until you can hear the refrigerant leaving the can.
- While charging, rotate the can between 12 o'clock and 3 o'clock every 2 to 3 seconds while continuously agitating (shaking) the can back and forth.
- Continue this process until the can is empty(5 to 15 minutes) or until the correct amount of refrigerant is charged into the A/C system.
- When the can feels empty, hold it upside down for one minute to remove all refrigerants.
- Charge the R-134a A/C system per OEM specifications.
- Remove quick connect fitting by pulling back on the connector ring and then pulling it off the service port.
- Remove the can from the charging kit and discard it.
Note :
Always store the charging kit with the piercing valve in the up position. This prevents piercing or the next can.
Caution :
Always use protective eyewear. Read labels on the refrigerant can before using this product.
Johnsen's R-134A Quick Charge Kit Plastic
- Designed for easy recharging of R-134a A/C systems using 12oz. cans.
- Contains a dispending valve. Hose and low side quick coupler.
- Plastic
Direction for use :
- Turn the valve handle of the charging kit counterclockwise until the piercing stem is in the up position.
- This will prevent piercing the R-134a can.
- Screw the low side service port on the A/C system.
- Locate the low side service port on the A/C system.
- Remove the cap from the low side service port.
- Attach quick connect fitting to the service port by pulling the connector ring back as you push it onto the service port.
- Make sure the fitting is tight.
- Start the engine and set A/C system control to max A/C.
- Turn the valve handles counterclockwise until you can hear the refrigerant leaving the can.
- While charging, rotate the can between 12 o'clock and 3 o'clock every 2 to 3 seconds while continuously agitating (shaking) the can back and forth.
- Continue this process until the can is empty(5 to 15 minutes) or until the correct amount of refrigerant is charged into the A/C system.
- When the can feels empty, hold it upside down for one minute to remove all refrigerants.
- Charge the R-134a A/C system per OEM specifications.
- Remove quick connect fitting by pulling back on the connector ring and then pulling it off the service port.
- Remove the can from the charging kit and discard it.
Note :
Always store the charging kit with the piercing valve in the up position. This prevents piercing or the next can.
Caution :
Always use protective eyewear. Read labels on the refrigerant can before using this product.
.عشر يوم حسب الدولة
.تكلفة توصيل الطلبات المحلية ۲ دينار كويتي لكل المناطق عدا الجزر و المناطق البرية
تكلفة الشحن للطلبات الدولية تعتمد على حسب الدولة و وزن و أبعاد المنتجات المطلوبة و سوف يتم التواصل مع العميل بعد إتمام عملية الطلب لإبلاغه بالتكلفة
من تاريخ الشراء طالما لم يتم فتح او تخريب المنتج و بشرط ان يكون المنتج بوضعه الجديد و قابل لإعادة البيع
جميع البضاعة التي يتم توصيلها الى العملاء جديدة و في حالتها الاصلية (ما عدا منتجات قسم العلبة المفتوحة) و في حال وصولها بغير هذه الحالة يجب للعميل رفض استلامها.
المنتجات المباعة في قسم العلب المفتوحة غير قابلة للإسترجاع كونها ليست جديدة
.يتم تاكيد الطلب بعد التاكد من توفر المنتج
.في حال عدم توفر المنتج او عدم صلاحية بيعه بسبب التلف او غيره يتم استرجاع المبلغ بالكامل
جميع المنتجات مكفولة من الوكيل المحلي و في حال وجود اي خلل او عطل مصنعي يتوجب التوجه للوكيل المحلي مباشرة.
يوافق العميل على جميع الشروط المذكورة عند استلام الفاتورة.
Delivery within the state of Kuwait usually takes 1 to 2 working days and international delivery takes upwards of 5 to 14 days.
Local delivery charges are 2 KWD for all urban areas including chalets & farms.
International delivery charges are linked to the weight & dimensions of the products ordered and will be calculated after the order has been submitted.
Orders will only be confirmed after all the order's product have confirmed their availability.
Due to any error in the availability or the irregular condition of the product, the customer will receive a full refund of the paid amount.
Returns and refunds are possible (Except delivery charges) within 14 days of the purchase date if the product has not been damaged or opened and is in it's original condition.
All products delivered to customers are in their original sealed conditions (Except products sold on the B-STOCK collection)
Customers have to refuse any product delivered by the courier incase the product's are not in their original sealed conditions.
B-stock items are non refundable since they are not sold as new.
All products are under local distributor warranty policy, if it has a manufacture defect or failure. Please contact the dealer directly.
The Customer agrees on all the mentioned policies upon receiving the order.