JEEP WRANGLER JK Poison Spyder BFH II Rear Bumper with D-Ring Tabs (Bare)
PRODUCT OVERVIEW
Poison Spyder BFH II Rear Bumpers are designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally “Built For the Hammers” with the best ground clearance and departure angle possible. It is no wider than the Jeep JK Wranglers rear body tub, with angled facets to improve its ability to slide over the rocks while still protecting the corner of the tub from drop-offs and ledges. This version of the BFH II features CNC machined high clearance recovery shackle tabs. For the ultimate in strength and durability, pair it with the JK BFH II Rear Crossmember. The BFH II Rear Bumper is CNC laser-cut from high strength 3/16″ plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used. The faceted plate steel design of the JK BFH II Rear Bumper provides the most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the stock rear crossmember. At the installers discretion, the stock rear crossmember may be plated across the open cut (materials to do this are not included), or the crossmember removed completely. If the stock crossmember is removed completely, it may be replaced with the JK BFH II Rear Crossmember (note that there are versions of the BFH II Crossmember with or without a receiver hitch this particular version of the BFH II Rear Bumper is specifically designed to work with the non-receiver version it will not work with the crossmember that has the integrated hitch receiver (p/n 17-17-030). The JK BFH II Rear Bumper includes heavy duty, high clearance Recovery Shackle Tabs. These tabs were CAD designed specifically for use with this bumper, with a high-clearance design to minimize loss of departure angle and to enable sliding off of rocks rather than hanging up on them. The tabs are CNC machined from 1″ thick plate steel to provide a secure attachment point for 3/4″ recovery shackles (sold separately). NOTES: Installation requires cutting of stock frame rails! Please read through the Installation Instructions so that you are fully aware of the modifications required to your Jeeps frame rails, before purchasing. This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.
PRODUCT OVERVIEW
Poison Spyder BFH II Rear Bumpers are designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally “Built For the Hammers” with the best ground clearance and departure angle possible. It is no wider than the Jeep JK Wranglers rear body tub, with angled facets to improve its ability to slide over the rocks while still protecting the corner of the tub from drop-offs and ledges. This version of the BFH II features CNC machined high clearance recovery shackle tabs. For the ultimate in strength and durability, pair it with the JK BFH II Rear Crossmember. The BFH II Rear Bumper is CNC laser-cut from high strength 3/16″ plate steel, then precision brake-formed for an exact fit. In keeping with its minimalist design parameter, the BFH II Rear Bumper has no provisions for a spare tire carrier. This bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep. It may also be compatible with the OE tailgate-mounted spare tire carrier, depending on the size of the spare tire used. The faceted plate steel design of the JK BFH II Rear Bumper provides the most ground/obstacle clearance and best departure angle of any JK rear bumper on the market. To achieve this, installation requires trimming the bulky rear frame rails and stock bumper mounts. A laser-cut steel template is provided to assist with making the right cuts. These modifications include cutting into the stock rear crossmember. At the installers discretion, the stock rear crossmember may be plated across the open cut (materials to do this are not included), or the crossmember removed completely. If the stock crossmember is removed completely, it may be replaced with the JK BFH II Rear Crossmember (note that there are versions of the BFH II Crossmember with or without a receiver hitch this particular version of the BFH II Rear Bumper is specifically designed to work with the non-receiver version it will not work with the crossmember that has the integrated hitch receiver (p/n 17-17-030). The JK BFH II Rear Bumper includes heavy duty, high clearance Recovery Shackle Tabs. These tabs were CAD designed specifically for use with this bumper, with a high-clearance design to minimize loss of departure angle and to enable sliding off of rocks rather than hanging up on them. The tabs are CNC machined from 1″ thick plate steel to provide a secure attachment point for 3/4″ recovery shackles (sold separately). NOTES: Installation requires cutting of stock frame rails! Please read through the Installation Instructions so that you are fully aware of the modifications required to your Jeeps frame rails, before purchasing. This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.
يتم توصيل الطلبات المحلية في دولة الكويت خلال يوم إلى يومين عمل و الطلبات الخارجية تستغرق خمسة الى اربعة عشر يوم حسب الدولة.
تكلفة توصيل الطلبات المحلية ۲ دينار كويتي لكل المناطق عدا الجزر و المناطق البرية.
تكلفة الشحن للطلبات الدولية تعتمد على حسب الدولة و وزن و أبعاد المنتجات المطلوبة و سوف يتم التواصل مع العميل بعد إتمام عملية الطلب لإبلاغه بالتكلفة.
يمكن للعميل إسترجاع البضاعة او تبديلها او استرجاع مبلغ البضاعة بالكامل (ما عدا رسوم التوصيل) خلال 14 يوم.
من تاريخ الشراء طالما لم يتم فتح او تخريب المنتج و بشرط ان يكون المنتج بوضعه الجديد و قابل لإعادة البيع.
جميع البضاعة التي يتم توصيلها الى العملاء جديدة و في حالتها الاصلية (ما عدا منتجات قسم العلبة المفتوحة) و في حال وصولها بغير هذه الحالة يجب للعميل رفض استلامها.
.المنتجات المباعة من قسم العلب المفتوحة غير قابلة للإسترجاع كونها ليست جديدة
.يتم تاكيد الطلب بعد التاكد من توفر المنتج
.في حال عدم توفر المنتج او عدم صلاحية بيعه بسبب التلف او غيره يتم استرجاع المبلغ بالكامل
جميع المنتجات مكفولة من الوكيل المحلي و في حال وجود اي خلل او عطل مصنعي يتوجب التوجه للوكيل المحلي مباشرة.
يوافق العميل على جميع الشروط المذكورة عند استلام الفاتورة.
Delivery within the state of Kuwait usually takes 1 to 2 working days and international delivery takes upwards of 5 to 14 days.
Local delivery charges are 2 KWD for all urban areas including chalets & farms.
International delivery charges are linked to the weight & dimensions of the products ordered and will be calculated after the order has been submitted.
Orders will only be confirmed after all the order's product have confirmed their availability.
Due to any error in the availability or the irregular condition of the product, the customer will receive a full refund of the paid amount.
Returns and refunds are possible (Except delivery charges) within 14 days of the purchase date if the product has not been damaged or opened and is in it's original condition.
All products delivered to customers are in their original sealed conditions (Except products sold on the B-STOCK collection)
Customers have to refuse any product delivered by the courier incase the product's are not in their original sealed conditions.
B-stock items are non refundable since they are not sold as new.
All products are under local distributor warranty policy, if it has a manufacture defect or failure. Please contact the dealer directly.
The Customer agrees on all the mentioned policies upon receiving the order.
