DUAL SENSING SMART START BATTERY ISOLATOR 12V 100A
The REDARC Smart Start® SBI12D is a microprocessor controlled battery isolator used in a dual battery system. It is designed to be used in dual battery systems as a solenoid priority system to protect the start battery from excessive discharge. The SBI12D provides 12 volt DC incorporating 100A of continuous ratings.
DUAL SENSING
The dual sensing model is used to isolate the start and auxiliary batteries in a system where the auxiliary battery may also be charged by an external source such as Solar panels or an external AC battery charger. The SBI12D also allows the start battery to be charged by the external source once the auxiliary battery reaches 13.2 volts. This is useful to top up the start battery.
POWER SAVING TECHNOLOGY
The Smart Start SBI12D incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.
Used primarily in 4WD and commercial vehicles, the Smart Start SBI is a safe way to charge an auxiliary battery and should often be installed with a high quality fuse kit.
FEATURES
- Overmould design
- Compact in size and easy to install
- Silver contacts for longer life and suitable for marine applications
- Power saving technology
- Fault indication
- Fully surge protected
| gtin_barcode | 9338628001330 |
|---|---|
| brand | REDARC |
| Max. Inrush Current | 400A |
| Max. Continous Current | 100A |
| Turn On Voltage | 13.2V |
| Turn Off Voltage | 12.7V |
| Turn On Delay | 5 seconds |
| Turn Off Delay | 10 seconds |
| Standby Current | <5mA |
| Weight | 200 g |
| height | 70 mm |
| width | 75 mm |
| depth | length | 80 mm |
| Warranty | 2 Years |
| System Voltage | 12V |
| Output Voltage | 12V DC |
| Input Fuse Rating | 100A |
| Output Fuse Rating | 100A |
The REDARC Smart Start® SBI12D is a microprocessor controlled battery isolator used in a dual battery system. It is designed to be used in dual battery systems as a solenoid priority system to protect the start battery from excessive discharge. The SBI12D provides 12 volt DC incorporating 100A of continuous ratings.
DUAL SENSING
The dual sensing model is used to isolate the start and auxiliary batteries in a system where the auxiliary battery may also be charged by an external source such as Solar panels or an external AC battery charger. The SBI12D also allows the start battery to be charged by the external source once the auxiliary battery reaches 13.2 volts. This is useful to top up the start battery.
POWER SAVING TECHNOLOGY
The Smart Start SBI12D incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.
Used primarily in 4WD and commercial vehicles, the Smart Start SBI is a safe way to charge an auxiliary battery and should often be installed with a high quality fuse kit.
FEATURES
- Overmould design
- Compact in size and easy to install
- Silver contacts for longer life and suitable for marine applications
- Power saving technology
- Fault indication
- Fully surge protected
| gtin_barcode | 9338628001330 |
|---|---|
| brand | REDARC |
| Max. Inrush Current | 400A |
| Max. Continous Current | 100A |
| Turn On Voltage | 13.2V |
| Turn Off Voltage | 12.7V |
| Turn On Delay | 5 seconds |
| Turn Off Delay | 10 seconds |
| Standby Current | <5mA |
| Weight | 200 g |
| height | 70 mm |
| width | 75 mm |
| depth | length | 80 mm |
| Warranty | 2 Years |
| System Voltage | 12V |
| Output Voltage | 12V DC |
| Input Fuse Rating | 100A |
| Output Fuse Rating | 100A |
يتم توصيل الطلبات المحلية في دولة الكويت خلال يوم إلى يومين عمل و الطلبات الخارجية تستغرق خمسة الى اربعة عشر يوم حسب الدولة.
تكلفة توصيل الطلبات المحلية ۲ دينار كويتي لكل المناطق عدا الجزر و المناطق البرية.
تكلفة الشحن للطلبات الدولية تعتمد على حسب الدولة و وزن و أبعاد المنتجات المطلوبة و سوف يتم التواصل مع العميل بعد إتمام عملية الطلب لإبلاغه بالتكلفة.
يمكن للعميل إسترجاع البضاعة او تبديلها او استرجاع مبلغ البضاعة بالكامل (ما عدا رسوم التوصيل) خلال 14 يوم.
من تاريخ الشراء طالما لم يتم فتح او تخريب المنتج و بشرط ان يكون المنتج بوضعه الجديد و قابل لإعادة البيع.
جميع البضاعة التي يتم توصيلها الى العملاء جديدة و في حالتها الاصلية (ما عدا منتجات قسم العلبة المفتوحة) و في حال وصولها بغير هذه الحالة يجب للعميل رفض استلامها.
.المنتجات المباعة من قسم العلب المفتوحة غير قابلة للإسترجاع كونها ليست جديدة
.يتم تاكيد الطلب بعد التاكد من توفر المنتج
.في حال عدم توفر المنتج او عدم صلاحية بيعه بسبب التلف او غيره يتم استرجاع المبلغ بالكامل
جميع المنتجات مكفولة من الوكيل المحلي و في حال وجود اي خلل او عطل مصنعي يتوجب التوجه للوكيل المحلي مباشرة.
يوافق العميل على جميع الشروط المذكورة عند استلام الفاتورة.
Delivery within the state of Kuwait usually takes 1 to 2 working days and international delivery takes upwards of 5 to 14 days.
Local delivery charges are 2 KWD for all urban areas including chalets & farms.
International delivery charges are linked to the weight & dimensions of the products ordered and will be calculated after the order has been submitted.
Orders will only be confirmed after all the order's product have confirmed their availability.
Due to any error in the availability or the irregular condition of the product, the customer will receive a full refund of the paid amount.
Returns and refunds are possible (Except delivery charges) within 14 days of the purchase date if the product has not been damaged or opened and is in it's original condition.
All products delivered to customers are in their original sealed conditions (Except products sold on the B-STOCK collection)
Customers have to refuse any product delivered by the courier incase the product's are not in their original sealed conditions.
B-stock items are non refundable since they are not sold as new.
All products are under local distributor warranty policy, if it has a manufacture defect or failure. Please contact the dealer directly.
The Customer agrees on all the mentioned policies upon receiving the order.