Tormek - SVS-50 Multi Jig

It is not without reason this jig is named "Multi Jig". It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat, which really makes it two jigs in one.

With SVS-50 you can sharpen square and skew turning chisels with straight or curved edges as well as parting tools, roughing gouges and gouges and chisels for woodcarving.

The closed seat

For square and skew chisels

The closed seat has been developed for the precision sharpening of square and skew chisels for woodturning and woodcarving. Since the chisel is mounted in the centre of the seat, you only need to mount the tool once for grinding both bevels. When one side is ready, you simply turn the jig upside down and sharpen the other side until they are symmetrical.

Thanks to a unique and patented design, the jig also copes with oval section skews. The jig aligns the skew so that it is parallel with the universal support and you can sharpen both straight and curved edges. Max width of skews 32 mm (1¼").

The open seat

For roughing gouges, parting tools and wide carving gouges 

The open seat, where the tool is fixed with a top screw, is used for tools which have the edge ground square across the shank, such as parting and beading tools, roughing gouges and wide carving gouges up to 50 mm (2") wide. The seats are mounted with a bottom screw, which also enable you to choose the skew angle.

Sharpening woodturning tools

SVS-50 together with the Turning Tool Setter

For sharpening woodturning tools, we highly recommend you to use the SVS-50 jig together with the TTS-100 Turning Tool Setter. That way you can exactly replicate the shape and edge angle over and over again. Also, it will save you time since you only remove a minimum amount of steel at each sharpening.

Wet grinding on your Tormek gives you a very sharp edge that will last much longer. A really sharp gouge cuts easily and you will notice it gives the wood a very fine surface, often there is no need for sanding.

Using SVS-50 on a bench grinder

For woodturning tools, if you have a new tool and need to remove a lot of steel in order to change a profile, you can with the mounting set BGM-100 also use SVS-50 on a bench grinder. But here you need to pay attention so that you do not burn the edge. After the initial rough shaping on a bench grinder, keep the tool in the jig and move over to the Tormek machine to give the edge the final sharpness.

VIDEO: SVS-50

Delivery within the state of Kuwait usually takes 1 to 2 working days and international delivery takes upwards of 5 to 14 days.

Local delivery charges are 2 KWD for all urban areas including chalets & farms.

International delivery charges are linked to the weight & dimensions of the products ordered and will be calculated after the order has been submitted.

Orders will only be confirmed after all the order's product have confirmed their availability.

Due to any error in the availability or the irregular condition of the product, the customer will receive a full refund of the paid amount.

Returns and refunds are possible (Except delivery charges) within 14 days of the purchase date if the product has not been damaged or opened and is in it's original condition.

B-stock items are non refundable since they are not sold as new.

All products are under local distributor warranty policy, if it has a manufacture defect or failure. Please contact the dealer directly.

The Customer agrees on all the mentioned policies upon receiving the order.