Tormek - TT-50 Truing Tool - IBF
If your grindstone has become uneven, it is easily fixed with the Tormek Diamond Truing and Dressing Tool TT-50. It will make your stone perfectly round and flat again.
Redesigned version 2019
This new design is made in cast zinc, which minimises the play and improves the precision and quality of the tool.
Easy feeding across the stone
You conveniently feed the diamond cutter across the stone by alternately turning the two knobs with both your hands. Thanks to the controlled feed, you get an even and flat stone surface with no ridges.
Controlled cutting depth
The cutting depth is set exactly by the Micro Adjust on the Universal Support. The scale has increments for each 0,25 mm or 0,01". Watch the video for a demonstration on how it works.
Create a coarse or fine surface
With a higher feed speed across the stone (approximately 30 seconds instead of 90 seconds) the surface will have pronounced grooves, which will cause the stone to grind faster. This is beneficial, when sharpening or shaping tools in hard steel with a large bevel area, e.g. turning skew chisels and electric jointer/planer blades.
The slower you feed, the finer the surface you will achieve. A traverse time of 90 seconds across the stone gives you a good finish with hardly any visible grooves.
For earlier Tormek models
If you have an older machine, which has no Micro Adjust on the Universal Support, you can update your machine with the new Universal Support US-105 or US-103 for the 200 mm stone models.
If your grindstone has become uneven, it is easily fixed with the Tormek Diamond Truing and Dressing Tool TT-50. It will make your stone perfectly round and flat again.
Redesigned version 2019
This new design is made in cast zinc, which minimises the play and improves the precision and quality of the tool.
Easy feeding across the stone
You conveniently feed the diamond cutter across the stone by alternately turning the two knobs with both your hands. Thanks to the controlled feed, you get an even and flat stone surface with no ridges.
Controlled cutting depth
The cutting depth is set exactly by the Micro Adjust on the Universal Support. The scale has increments for each 0,25 mm or 0,01". Watch the video for a demonstration on how it works.
Create a coarse or fine surface
With a higher feed speed across the stone (approximately 30 seconds instead of 90 seconds) the surface will have pronounced grooves, which will cause the stone to grind faster. This is beneficial, when sharpening or shaping tools in hard steel with a large bevel area, e.g. turning skew chisels and electric jointer/planer blades.
The slower you feed, the finer the surface you will achieve. A traverse time of 90 seconds across the stone gives you a good finish with hardly any visible grooves.
For earlier Tormek models
If you have an older machine, which has no Micro Adjust on the Universal Support, you can update your machine with the new Universal Support US-105 or US-103 for the 200 mm stone models.
.عشر يوم حسب الدولة
.تكلفة توصيل الطلبات المحلية ۲ دينار كويتي لكل المناطق عدا الجزر و المناطق البرية
تكلفة الشحن للطلبات الدولية تعتمد على حسب الدولة و وزن و أبعاد المنتجات المطلوبة و سوف يتم التواصل مع العميل بعد إتمام عملية الطلب لإبلاغه بالتكلفة
من تاريخ الشراء طالما لم يتم فتح او تخريب المنتج و بشرط ان يكون المنتج بوضعه الجديد و قابل لإعادة البيع
جميع البضاعة التي يتم توصيلها الى العملاء جديدة و في حالتها الاصلية (ما عدا منتجات قسم العلبة المفتوحة) و في حال وصولها بغير هذه الحالة يجب للعميل رفض استلامها.
المنتجات المباعة في قسم العلب المفتوحة غير قابلة للإسترجاع كونها ليست جديدة
.يتم تاكيد الطلب بعد التاكد من توفر المنتج
.في حال عدم توفر المنتج او عدم صلاحية بيعه بسبب التلف او غيره يتم استرجاع المبلغ بالكامل
جميع المنتجات مكفولة من الوكيل المحلي و في حال وجود اي خلل او عطل مصنعي يتوجب التوجه للوكيل المحلي مباشرة.
يوافق العميل على جميع الشروط المذكورة عند استلام الفاتورة.
Delivery within the state of Kuwait usually takes 1 to 2 working days and international delivery takes upwards of 5 to 14 days.
Local delivery charges are 2 KWD for all urban areas including chalets & farms.
International delivery charges are linked to the weight & dimensions of the products ordered and will be calculated after the order has been submitted.
Orders will only be confirmed after all the order's product have confirmed their availability.
Due to any error in the availability or the irregular condition of the product, the customer will receive a full refund of the paid amount.
Returns and refunds are possible (Except delivery charges) within 14 days of the purchase date if the product has not been damaged or opened and is in it's original condition.
All products delivered to customers are in their original sealed conditions (Except products sold on the B-STOCK collection)
Customers have to refuse any product delivered by the courier incase the product's are not in their original sealed conditions.
B-stock items are non refundable since they are not sold as new.
All products are under local distributor warranty policy, if it has a manufacture defect or failure. Please contact the dealer directly.
The Customer agrees on all the mentioned policies upon receiving the order.
