Lightforce Dual Voltmeter with 3.0 Amp USB Fast Charger
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Lightforce Dual Voltmeter with 3.0 Amp USB Fast Charger

Available: In Stock
8.000 KD
Image
Designed to monitor both your main battery and your auxiliary battery, this Voltmeter from Lightforce takes the stress out of wondering whether your batteries will go the distance. You can keep an eye on voltage levels and monitor your alternator charge rate while on the road and catch any dual battery isolator faults before they cause an issue.

The voltmeter has a 3.0 Amp USB Fast Charge port that is connected to your auxiliary battery for charging essential digital devices while driving or when the vehicle isn’t in use. This USB 3.0 outlet is capable of charging high powered smartphones, tablets and GPS devices.

Feature and Benefits

  • The top LEDs display the Main Battery voltage or an ACC input
  • The lower LEDs display the Auxiliary Battery voltage
  • The illumination is only active when power is delivered from the Main Battery input
  • A dust cover provides added durability when mounting in vulnerable locations
  • The dust cover can be completely removed during installation if not required
  • The simple “plastic nut” style mounting system makes installation easy
  • Operating voltage 12 to 24 volts DC
  • USB Fast Charge output 3.0 Amps at 5.1 volts, always powered from the Auxiliary Battery
  • Mounting hole diameter 29mm
  • Fits panel thicknesses up to 28mm.

Please ensure fuses are utilised as depicted in the diagram. Fuses not supplied.

The Lightforce Dual Voltmeter will fit most cig plug holes, once the cig plug has been removed. Please make sure that the hole where your cig plug goes matches the sizes of our product to ensure it fits properly.

Current Draw:

The current draw with the LED display on (no USB device connected) is 13.8mA. The current draw with the LED display off is 8mA (no USB device connected).If the dual voltmeter is wired as per our recommendation, the LED display should only be active when the ignition is on, so the only residual current draw applicable is 8mA when the USB is not being used.


Designed to monitor both your main battery and your auxiliary battery, this Voltmeter from Lightforce takes the stress out of wondering whether your batteries will go the distance. You can keep an eye on voltage levels and monitor your alternator charge rate while on the road and catch any dual battery isolator faults before they cause an issue.

The voltmeter has a 3.0 Amp USB Fast Charge port that is connected to your auxiliary battery for charging essential digital devices while driving or when the vehicle isn’t in use. This USB 3.0 outlet is capable of charging high powered smartphones, tablets and GPS devices.

Feature and Benefits

  • The top LEDs display the Main Battery voltage or an ACC input
  • The lower LEDs display the Auxiliary Battery voltage
  • The illumination is only active when power is delivered from the Main Battery input
  • A dust cover provides added durability when mounting in vulnerable locations
  • The dust cover can be completely removed during installation if not required
  • The simple “plastic nut” style mounting system makes installation easy
  • Operating voltage 12 to 24 volts DC
  • USB Fast Charge output 3.0 Amps at 5.1 volts, always powered from the Auxiliary Battery
  • Mounting hole diameter 29mm
  • Fits panel thicknesses up to 28mm.

Please ensure fuses are utilised as depicted in the diagram. Fuses not supplied.

The Lightforce Dual Voltmeter will fit most cig plug holes, once the cig plug has been removed. Please make sure that the hole where your cig plug goes matches the sizes of our product to ensure it fits properly.

Current Draw:

The current draw with the LED display on (no USB device connected) is 13.8mA. The current draw with the LED display off is 8mA (no USB device connected).If the dual voltmeter is wired as per our recommendation, the LED display should only be active when the ignition is on, so the only residual current draw applicable is 8mA when the USB is not being used.


يتم توصيل الطلبات المحلية في دولة الكويت خلال يوم إلى يومين عمل و الطلبات الخارجية تستغرق خمسة الى اربعة
.عشر يوم حسب الدولة

.تكلفة توصيل الطلبات المحلية ۲ دينار كويتي لكل المناطق عدا الجزر و المناطق البرية 

 تكلفة الشحن للطلبات الدولية تعتمد على حسب الدولة و وزن و أبعاد المنتجات المطلوبة و سوف يتم التواصل مع  العميل بعد إتمام عملية الطلب لإبلاغه بالتكلفة

يمكن للعميل إسترجاع البضاعة او تبديلها او استرجاع مبلغ البضاعة بالكامل (معدا رسوم التوصيل) خلال 14 يوم
من تاريخ الشراء طالما لم يتم فتح او تخريب المنتج و بشرط ان يكون المنتج بوضعه الجديد و قابل لإعادة البيع

جميع البضاعة التي يتم توصيلها الى العملاء جديدة و في حالتها الاصلية  (ما عدا منتجات قسم العلبة المفتوحة)  و في حال وصولها بغير هذه الحالة يجب للعميل رفض استلامها.

المنتجات المباعة في قسم العلب المفتوحة غير قابلة للإسترجاع كونها ليست جديدة

.يتم تاكيد الطلب بعد التاكد من توفر المنتج 
.في حال عدم توفر المنتج او عدم صلاحية بيعه بسبب التلف او غيره يتم استرجاع المبلغ بالكامل

جميع المنتجات مكفولة من الوكيل المحلي و في حال وجود اي خلل او عطل مصنعي يتوجب التوجه للوكيل المحلي مباشرة.

يوافق العميل على جميع الشروط المذكورة عند استلام الفاتورة.


Delivery within the state of Kuwait usually takes 1 to 2 working days and international delivery takes upwards of 5 to 14 days.

Local delivery charges are 2 KWD for all urban areas including chalets & farms.


International delivery charges are linked to the weight & dimensions of the products ordered and will be calculated after the order has been submitted.

Orders will only be confirmed after all the order's product have confirmed their availability.

Due to any error in the availability or the irregular condition of the product, the customer will receive a full refund of the paid amount.

Returns and refunds are possible (Except delivery charges) within 14 days of the purchase date if the product has not been damaged or opened and is in it's original condition.

All products delivered to customers are in their original sealed conditions (Except products sold on the B-STOCK collection) 

Customers have to refuse any product delivered by the courier incase the product's are not in their original sealed conditions.  

B-stock items are non refundable since they are not sold as new.

All products are under local distributor warranty policy, if it has a manufacture defect or failure. Please contact the dealer directly.


The Customer agrees on all the mentioned policies upon receiving the order.