BigRed Hydraulic Bottle Jack 6 Ton - Red
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

BigRed Hydraulic Bottle Jack 6 Ton - Red

Available: In Stock
7.250 KD
Image

Big Red Hydraulic Bottle Jack 6 ton – Red

This BIGRED product is designed for lifting. The jack can be used vertically or angled to 3 degrees from a vertical position. After lifting, loads must be immediately supported by jack stands. Each model is suitable for use in lifting or positioning vehicles, machinery, houses, and/or other building structures.

  •  Heat-treated extension screw allows low pickup height adjustment and maximum lift height.
    • Serrated, heat treated saddle provides generous lifting area and secure grip.
    • A wide, rugged base provides stability and strength. All models critical stress points are reinforced for added durability and dependability.

Direction for use :

  • To raise a load, close the release valve by rotating the handle firmly in a clockwise direction (do not over-tighten).
  • Carefully position the jack under the load and pump the jack handle to raise the load to the desired height.
  • If raising a vehicle, always support it with vehicle stands before working on the vehicle or getting under it for any reason
  • To lower the load, slowly rotate the jack handle counterclockwise just enough to open the release valve. Opening the release valve more permits the load to descend faster.
  • IMPORTANT: As with any hydraulic unit, this unit may occasionally become "air-bound" due to being tipped over during shipment.
  • To purge the air from the oil lines, open the release and pump rapidly a few strokes. Close release and pump to full height, then open the release to allow the ram to descend rapidly. lf the pump still seems "spongy", repeat the procedure

Big Red Hydraulic Bottle Jack 6 ton – Red

This BIGRED product is designed for lifting. The jack can be used vertically or angled to 3 degrees from a vertical position. After lifting, loads must be immediately supported by jack stands. Each model is suitable for use in lifting or positioning vehicles, machinery, houses, and/or other building structures.

  •  Heat-treated extension screw allows low pickup height adjustment and maximum lift height.
    • Serrated, heat treated saddle provides generous lifting area and secure grip.
    • A wide, rugged base provides stability and strength. All models critical stress points are reinforced for added durability and dependability.

Direction for use :

  • To raise a load, close the release valve by rotating the handle firmly in a clockwise direction (do not over-tighten).
  • Carefully position the jack under the load and pump the jack handle to raise the load to the desired height.
  • If raising a vehicle, always support it with vehicle stands before working on the vehicle or getting under it for any reason
  • To lower the load, slowly rotate the jack handle counterclockwise just enough to open the release valve. Opening the release valve more permits the load to descend faster.
  • IMPORTANT: As with any hydraulic unit, this unit may occasionally become "air-bound" due to being tipped over during shipment.
  • To purge the air from the oil lines, open the release and pump rapidly a few strokes. Close release and pump to full height, then open the release to allow the ram to descend rapidly. lf the pump still seems "spongy", repeat the procedure
يتم توصيل الطلبات المحلية في دولة الكويت خلال يوم إلى يومين عمل و الطلبات الخارجية تستغرق خمسة الى اربعة
.عشر يوم حسب الدولة

.تكلفة توصيل الطلبات المحلية ۲ دينار كويتي لكل المناطق عدا الجزر و المناطق البرية 

 تكلفة الشحن للطلبات الدولية تعتمد على حسب الدولة و وزن و أبعاد المنتجات المطلوبة و سوف يتم التواصل مع  العميل بعد إتمام عملية الطلب لإبلاغه بالتكلفة

يمكن للعميل إسترجاع البضاعة او تبديلها او استرجاع مبلغ البضاعة بالكامل (معدا رسوم التوصيل) خلال 14 يوم
من تاريخ الشراء طالما لم يتم فتح او تخريب المنتج و بشرط ان يكون المنتج بوضعه الجديد و قابل لإعادة البيع

جميع البضاعة التي يتم توصيلها الى العملاء جديدة و في حالتها الاصلية  (ما عدا منتجات قسم العلبة المفتوحة)  و في حال وصولها بغير هذه الحالة يجب للعميل رفض استلامها.

المنتجات المباعة في قسم العلب المفتوحة غير قابلة للإسترجاع كونها ليست جديدة

.يتم تاكيد الطلب بعد التاكد من توفر المنتج 
.في حال عدم توفر المنتج او عدم صلاحية بيعه بسبب التلف او غيره يتم استرجاع المبلغ بالكامل

جميع المنتجات مكفولة من الوكيل المحلي و في حال وجود اي خلل او عطل مصنعي يتوجب التوجه للوكيل المحلي مباشرة.

يوافق العميل على جميع الشروط المذكورة عند استلام الفاتورة.


Delivery within the state of Kuwait usually takes 1 to 2 working days and international delivery takes upwards of 5 to 14 days.

Local delivery charges are 2 KWD for all urban areas including chalets & farms.


International delivery charges are linked to the weight & dimensions of the products ordered and will be calculated after the order has been submitted.

Orders will only be confirmed after all the order's product have confirmed their availability.

Due to any error in the availability or the irregular condition of the product, the customer will receive a full refund of the paid amount.

Returns and refunds are possible (Except delivery charges) within 14 days of the purchase date if the product has not been damaged or opened and is in it's original condition.

All products delivered to customers are in their original sealed conditions (Except products sold on the B-STOCK collection) 

Customers have to refuse any product delivered by the courier incase the product's are not in their original sealed conditions.  

B-stock items are non refundable since they are not sold as new.

All products are under local distributor warranty policy, if it has a manufacture defect or failure. Please contact the dealer directly.


The Customer agrees on all the mentioned policies upon receiving the order.