Hypersonic Decorative Rear Bumper Step Guard Platinum
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Hypersonic Decorative Rear Bumper Step Guard Platinum

Available: In Stock
5.750 KD
Image

Hypersonic® HP-6183 Decorative Rear Step Guard

The Decorative Rear Step Guard is made of scratch-resistant, grease, dust-resistant chrome plating that protects the rear footrest of your car from minor scratches or collisions as you enter items from the rear door of the car. This rear step protector also has a platinum finish to give it a sporty impression when applied.

  • Made from ABS.
  • 3-piece set for minor length and angle adjustments.

Installation Instructions

  • Determine installation location: Hold the middle piece against the bumper then position the right and left piece adjacent and slightly cover the middle piece. Adjust position and angle according to the bumper shape and size.
  • For reference, place masking tape as shows for markings. Open up the trunk or the doors to make sure the bumper protector does not interfere with it.
  • Clean the install surface with mild-cleaner (neutral detergent) and cloth. Let dry or remove moisture with dry cloth.
  • Remove the protective sheets
  • Take the middle piece and hold it by the ends, edge the top/ bottom against the masking tape marking and gently tape the piece against the bumper.
  • Bumper from the center forward both ends. Repeat step for the right and left piece.

Caution 

  • Do not detach and reattach after initial installation.
  • For maximum adhesive effect, let the tape set for 24hours without other pressures.
  • Before purchasing, refer to the below diagram for size specs and make sure the bumper has adequate area for it.

Specification

  • Product Dimensions: Left Strip (275mm), Middle Part(380mm), Right Part(275mm)
  • Material: ABS
  • Color: Chrome
  • Weight: 167g

Package Includes

  • 1x HP-6183 Decorative Rear Bumper Step Guard Set
  • 1x Left Strip (275mm), 1x Middle Strip (380mm), 1x Right Strip(275mm)

*All mentioned brands and trademarks belong to the respective owners and are mentioned or shown on this website exclusively for information purposes.

*All copyrights and trademarks belong to the respective owners and are mentioned on our internet website solely for information purposes. Hypersonic®

Hypersonic® HP-6183 Decorative Rear Step Guard

The Decorative Rear Step Guard is made of scratch-resistant, grease, dust-resistant chrome plating that protects the rear footrest of your car from minor scratches or collisions as you enter items from the rear door of the car. This rear step protector also has a platinum finish to give it a sporty impression when applied.

  • Made from ABS.
  • 3-piece set for minor length and angle adjustments.

Installation Instructions

  • Determine installation location: Hold the middle piece against the bumper then position the right and left piece adjacent and slightly cover the middle piece. Adjust position and angle according to the bumper shape and size.
  • For reference, place masking tape as shows for markings. Open up the trunk or the doors to make sure the bumper protector does not interfere with it.
  • Clean the install surface with mild-cleaner (neutral detergent) and cloth. Let dry or remove moisture with dry cloth.
  • Remove the protective sheets
  • Take the middle piece and hold it by the ends, edge the top/ bottom against the masking tape marking and gently tape the piece against the bumper.
  • Bumper from the center forward both ends. Repeat step for the right and left piece.

Caution 

  • Do not detach and reattach after initial installation.
  • For maximum adhesive effect, let the tape set for 24hours without other pressures.
  • Before purchasing, refer to the below diagram for size specs and make sure the bumper has adequate area for it.

Specification

  • Product Dimensions: Left Strip (275mm), Middle Part(380mm), Right Part(275mm)
  • Material: ABS
  • Color: Chrome
  • Weight: 167g

Package Includes

  • 1x HP-6183 Decorative Rear Bumper Step Guard Set
  • 1x Left Strip (275mm), 1x Middle Strip (380mm), 1x Right Strip(275mm)

*All mentioned brands and trademarks belong to the respective owners and are mentioned or shown on this website exclusively for information purposes.

*All copyrights and trademarks belong to the respective owners and are mentioned on our internet website solely for information purposes. Hypersonic®

يتم توصيل الطلبات المحلية في دولة الكويت خلال يوم إلى يومين عمل و الطلبات الخارجية تستغرق خمسة الى اربعة
.عشر يوم حسب الدولة

.تكلفة توصيل الطلبات المحلية ۲ دينار كويتي لكل المناطق عدا الجزر و المناطق البرية 

 تكلفة الشحن للطلبات الدولية تعتمد على حسب الدولة و وزن و أبعاد المنتجات المطلوبة و سوف يتم التواصل مع  العميل بعد إتمام عملية الطلب لإبلاغه بالتكلفة

يمكن للعميل إسترجاع البضاعة او تبديلها او استرجاع مبلغ البضاعة بالكامل (معدا رسوم التوصيل) خلال 14 يوم
من تاريخ الشراء طالما لم يتم فتح او تخريب المنتج و بشرط ان يكون المنتج بوضعه الجديد و قابل لإعادة البيع

جميع البضاعة التي يتم توصيلها الى العملاء جديدة و في حالتها الاصلية  (ما عدا منتجات قسم العلبة المفتوحة)  و في حال وصولها بغير هذه الحالة يجب للعميل رفض استلامها.

المنتجات المباعة في قسم العلب المفتوحة غير قابلة للإسترجاع كونها ليست جديدة

.يتم تاكيد الطلب بعد التاكد من توفر المنتج 
.في حال عدم توفر المنتج او عدم صلاحية بيعه بسبب التلف او غيره يتم استرجاع المبلغ بالكامل

جميع المنتجات مكفولة من الوكيل المحلي و في حال وجود اي خلل او عطل مصنعي يتوجب التوجه للوكيل المحلي مباشرة.

يوافق العميل على جميع الشروط المذكورة عند استلام الفاتورة.


Delivery within the state of Kuwait usually takes 1 to 2 working days and international delivery takes upwards of 5 to 14 days.

Local delivery charges are 2 KWD for all urban areas including chalets & farms.


International delivery charges are linked to the weight & dimensions of the products ordered and will be calculated after the order has been submitted.

Orders will only be confirmed after all the order's product have confirmed their availability.

Due to any error in the availability or the irregular condition of the product, the customer will receive a full refund of the paid amount.

Returns and refunds are possible (Except delivery charges) within 14 days of the purchase date if the product has not been damaged or opened and is in it's original condition.

All products delivered to customers are in their original sealed conditions (Except products sold on the B-STOCK collection) 

Customers have to refuse any product delivered by the courier incase the product's are not in their original sealed conditions.  

B-stock items are non refundable since they are not sold as new.

All products are under local distributor warranty policy, if it has a manufacture defect or failure. Please contact the dealer directly.


The Customer agrees on all the mentioned policies upon receiving the order.