BigRed Hydro Floor Jack 2Ton
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

BigRed Hydro Floor Jack 2Ton

Available: In Stock
11.000 KD
Image

Bigred Body Repair Hydraulic Jack with Blow Mold & Storage Box 2 Ton - Red

  • Important!

    Before attempting to rise a vehicle, check the vehicle service manual for recommended lifting surfaces.

    To raise load :

    • Close release valve tightly (by turning the handle clockwise) DO NOT OVERTIGHTEN.

    • Position jack under load so that saddle will contact load firmly and load is centered so it cannot slip.

    • Operate jack handle until saddle approaches the load.

    • Once again check to see that saddle is correctly positioned.

    • Raise load to the desired height.

    • Place jack stands of appropriate capacity under the vehicle.

    • DO NOT CRAWL UNDER VEHICLE WHILE LIFTING VEHICLE OR PLACING OR REMOVING JACK STANDS!

    • Place jack stands at the vehicle manufacturer's recommended lift areas that provide stable support for the raised vehicle.

    To Lower Load :

    • Open release valve VERY SLOWLY (by turning the handle counterclockwise).

    • When the release valve is opened, saddle and load will be lowered.

    • Lower the vehicle slowly so as not to shock load the jack stands.

    • Once repairs are completed, raise the vehicle enough to remove jack stands.

    • Lower vehicle very slowly.

    CAUTION: Keep hands or feet away from the hinge mechanism of the jack.

Includes :

  • 1 psc Saddle

  • 1 psc SUV Saddle

  • 1 psc Front Wheel Assembly

  • 1 psc Handle Fork

  • 1 psc Release Valve

  • 1 psc Handle Assembly

  • 1 psc Power Unit Assembly

  • 1 psc Rear Caster Assembly

Bigred Body Repair Hydraulic Jack with Blow Mold & Storage Box 2 Ton - Red

  • Important!

    Before attempting to rise a vehicle, check the vehicle service manual for recommended lifting surfaces.

    To raise load :

    • Close release valve tightly (by turning the handle clockwise) DO NOT OVERTIGHTEN.

    • Position jack under load so that saddle will contact load firmly and load is centered so it cannot slip.

    • Operate jack handle until saddle approaches the load.

    • Once again check to see that saddle is correctly positioned.

    • Raise load to the desired height.

    • Place jack stands of appropriate capacity under the vehicle.

    • DO NOT CRAWL UNDER VEHICLE WHILE LIFTING VEHICLE OR PLACING OR REMOVING JACK STANDS!

    • Place jack stands at the vehicle manufacturer's recommended lift areas that provide stable support for the raised vehicle.

    To Lower Load :

    • Open release valve VERY SLOWLY (by turning the handle counterclockwise).

    • When the release valve is opened, saddle and load will be lowered.

    • Lower the vehicle slowly so as not to shock load the jack stands.

    • Once repairs are completed, raise the vehicle enough to remove jack stands.

    • Lower vehicle very slowly.

    CAUTION: Keep hands or feet away from the hinge mechanism of the jack.

Includes :

  • 1 psc Saddle

  • 1 psc SUV Saddle

  • 1 psc Front Wheel Assembly

  • 1 psc Handle Fork

  • 1 psc Release Valve

  • 1 psc Handle Assembly

  • 1 psc Power Unit Assembly

  • 1 psc Rear Caster Assembly

يتم توصيل الطلبات المحلية في دولة الكويت خلال يوم إلى يومين عمل و الطلبات الخارجية تستغرق خمسة الى اربعة
.عشر يوم حسب الدولة

.تكلفة توصيل الطلبات المحلية ۲ دينار كويتي لكل المناطق عدا الجزر و المناطق البرية 

 تكلفة الشحن للطلبات الدولية تعتمد على حسب الدولة و وزن و أبعاد المنتجات المطلوبة و سوف يتم التواصل مع  العميل بعد إتمام عملية الطلب لإبلاغه بالتكلفة

يمكن للعميل إسترجاع البضاعة او تبديلها او استرجاع مبلغ البضاعة بالكامل (معدا رسوم التوصيل) خلال 14 يوم
من تاريخ الشراء طالما لم يتم فتح او تخريب المنتج و بشرط ان يكون المنتج بوضعه الجديد و قابل لإعادة البيع

جميع البضاعة التي يتم توصيلها الى العملاء جديدة و في حالتها الاصلية  (ما عدا منتجات قسم العلبة المفتوحة)  و في حال وصولها بغير هذه الحالة يجب للعميل رفض استلامها.

المنتجات المباعة في قسم العلب المفتوحة غير قابلة للإسترجاع كونها ليست جديدة

.يتم تاكيد الطلب بعد التاكد من توفر المنتج 
.في حال عدم توفر المنتج او عدم صلاحية بيعه بسبب التلف او غيره يتم استرجاع المبلغ بالكامل

جميع المنتجات مكفولة من الوكيل المحلي و في حال وجود اي خلل او عطل مصنعي يتوجب التوجه للوكيل المحلي مباشرة.

يوافق العميل على جميع الشروط المذكورة عند استلام الفاتورة.


Delivery within the state of Kuwait usually takes 1 to 2 working days and international delivery takes upwards of 5 to 14 days.

Local delivery charges are 2 KWD for all urban areas including chalets & farms.


International delivery charges are linked to the weight & dimensions of the products ordered and will be calculated after the order has been submitted.

Orders will only be confirmed after all the order's product have confirmed their availability.

Due to any error in the availability or the irregular condition of the product, the customer will receive a full refund of the paid amount.

Returns and refunds are possible (Except delivery charges) within 14 days of the purchase date if the product has not been damaged or opened and is in it's original condition.

All products delivered to customers are in their original sealed conditions (Except products sold on the B-STOCK collection) 

Customers have to refuse any product delivered by the courier incase the product's are not in their original sealed conditions.  

B-stock items are non refundable since they are not sold as new.

All products are under local distributor warranty policy, if it has a manufacture defect or failure. Please contact the dealer directly.


The Customer agrees on all the mentioned policies upon receiving the order.