Strands Cruise Light Strobe Control
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Strands Cruise Light Strobe Control

Available: In Stock
18.00 KD
Image
Other people want this. 20 people have this in their carts right now.

Welcome to the frontline of warning lights and the updated Cruise Light strobe controller 2.0. It has many exciting opportunities for automotive light styling. The strobe controller can be connected to up to 6 lights with a maximum of 30W power consumption each, enabling a strobe light function to any light. Choose between 12 strobe light patterns and separate cruise mode/steady on to maximize your vehicle’s look. There are several choices of standard and dynamic patterns. The Cruise Light strobe controller 2.0 has a cast aluminum housing that has IP-class IP68, making it very durable and resistant to water and hard use. It is delivered with a 3-year function warranty.

How to connect the Cruise Light strobe controller:

Strobe controller 2.0 has two channels in and six channels out, with six red (+) cables and six black (-) cables. The cables are connected to the lights in sequence. If some of the cables are not used, please isolate the cable ends to keep moisture out and to avoid short-circuiting the PCB. If the light is already connected to ground/chassi there is no need to attach the strobe controllers’ black cables.

With the new blue cable for steady on/cruise mode, you no longer need to go through every pattern to get back to steady on, but you can always return to steady on directly from any pattern. It can be connected to the vehicles’ position light signal.

For the incoming power, you have a black, red, and yellow cable. The black cable is connected to ground or the battery (-), the red cable is usually connected to the battery (+), a switch or a button inside the cabin, and the yellow connects to the red one to choose between the patterns and is usually connected to a button or switch. The blue cable is for steady on/cruise mode. It can be connected to the vehicle’s position lights if you want to have the lights on at the same time as the position lights. By connecting the red cable, it will be a priority and start flashing on a pre-selected pattern. Since some of the patterns are dynamic/running, it´s important to connect the channels in the order you want the lights to flash.

 

Voltage (V DC): 10-35V DC

Patterns: 12

Connection: Cable

Cable length (mm): "4 wires in:500mm, 12 wires out:500mm for each channel"

Material housing/chassi: PC

Length (mm): 100

Depth (mm): 50

Height (mm): 17

CC (mm): 25/90

IP-class: 68

Operating temperature: -40 - +65°C

E-approved: No

Welcome to the frontline of warning lights and the updated Cruise Light strobe controller 2.0. It has many exciting opportunities for automotive light styling. The strobe controller can be connected to up to 6 lights with a maximum of 30W power consumption each, enabling a strobe light function to any light. Choose between 12 strobe light patterns and separate cruise mode/steady on to maximize your vehicle’s look. There are several choices of standard and dynamic patterns. The Cruise Light strobe controller 2.0 has a cast aluminum housing that has IP-class IP68, making it very durable and resistant to water and hard use. It is delivered with a 3-year function warranty.

How to connect the Cruise Light strobe controller:

Strobe controller 2.0 has two channels in and six channels out, with six red (+) cables and six black (-) cables. The cables are connected to the lights in sequence. If some of the cables are not used, please isolate the cable ends to keep moisture out and to avoid short-circuiting the PCB. If the light is already connected to ground/chassi there is no need to attach the strobe controllers’ black cables.

With the new blue cable for steady on/cruise mode, you no longer need to go through every pattern to get back to steady on, but you can always return to steady on directly from any pattern. It can be connected to the vehicles’ position light signal.

For the incoming power, you have a black, red, and yellow cable. The black cable is connected to ground or the battery (-), the red cable is usually connected to the battery (+), a switch or a button inside the cabin, and the yellow connects to the red one to choose between the patterns and is usually connected to a button or switch. The blue cable is for steady on/cruise mode. It can be connected to the vehicle’s position lights if you want to have the lights on at the same time as the position lights. By connecting the red cable, it will be a priority and start flashing on a pre-selected pattern. Since some of the patterns are dynamic/running, it´s important to connect the channels in the order you want the lights to flash.

 

Voltage (V DC): 10-35V DC

Patterns: 12

Connection: Cable

Cable length (mm): "4 wires in:500mm, 12 wires out:500mm for each channel"

Material housing/chassi: PC

Length (mm): 100

Depth (mm): 50

Height (mm): 17

CC (mm): 25/90

IP-class: 68

Operating temperature: -40 - +65°C

E-approved: No

يتم توصيل الطلبات المحلية في دولة الكويت خلال يوم إلى يومين عمل و الطلبات الخارجية تستغرق خمسة الى اربعة
.عشر يوم حسب الدولة

.تكلفة توصيل الطلبات المحلية ۲ دينار كويتي لكل المناطق عدا الجزر و المناطق البرية 

 تكلفة الشحن للطلبات الدولية تعتمد على حسب الدولة و وزن و أبعاد المنتجات المطلوبة و سوف يتم التواصل مع  العميل بعد إتمام عملية الطلب لإبلاغه بالتكلفة

يمكن للعميل إسترجاع البضاعة او تبديلها او استرجاع مبلغ البضاعة بالكامل (معدا رسوم التوصيل) خلال 14 يوم
من تاريخ الشراء طالما لم يتم فتح او تخريب المنتج و بشرط ان يكون المنتج بوضعه الجديد و قابل لإعادة البيع

جميع البضاعة التي يتم توصيلها الى العملاء جديدة و في حالتها الاصلية  (ما عدا منتجات قسم العلبة المفتوحة)  و في حال وصولها بغير هذه الحالة يجب للعميل رفض استلامها.

المنتجات المباعة في قسم العلب المفتوحة غير قابلة للإسترجاع كونها ليست جديدة

.يتم تاكيد الطلب بعد التاكد من توفر المنتج 
.في حال عدم توفر المنتج او عدم صلاحية بيعه بسبب التلف او غيره يتم استرجاع المبلغ بالكامل

جميع المنتجات مكفولة من الوكيل المحلي و في حال وجود اي خلل او عطل مصنعي يتوجب التوجه للوكيل المحلي مباشرة.

يوافق العميل على جميع الشروط المذكورة عند استلام الفاتورة.


Delivery within the state of Kuwait usually takes 1 to 2 working days and international delivery takes upwards of 5 to 14 days.

Local delivery charges are 2 KWD for all urban areas including chalets & farms.


International delivery charges are linked to the weight & dimensions of the products ordered and will be calculated after the order has been submitted.

Orders will only be confirmed after all the order's product have confirmed their availability.

Due to any error in the availability or the irregular condition of the product, the customer will receive a full refund of the paid amount.

Returns and refunds are possible (Except delivery charges) within 14 days of the purchase date if the product has not been damaged or opened and is in it's original condition.

All products delivered to customers are in their original sealed conditions (Except products sold on the B-STOCK collection) 

Customers have to refuse any product delivered by the courier incase the product's are not in their original sealed conditions.  

B-stock items are non refundable since they are not sold as new.

All products are under local distributor warranty policy, if it has a manufacture defect or failure. Please contact the dealer directly.


The Customer agrees on all the mentioned policies upon receiving the order.